Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: simmy on 01 March 2012, 22:37:41

Title: pedal test
Post by: simmy on 01 March 2012, 22:37:41
hi all

did the pedal test tonight counted 11 flashes then a apause followed by 1 pause then 11 pause then 12 dont know how to work this out in relation to codes any ideas
Title: Re: pedal test
Post by: TheBoy on 02 March 2012, 17:36:10
I didn't think the 2.2 could do a pedal test  :-\
Title: Re: pedal test
Post by: feeutfo on 02 March 2012, 22:27:29
And the pedal test doesn't go one louder either. Bit early for April fools me fingks. ;) ;D
Title: Re: pedal test
Post by: HockeyDave55 on 03 March 2012, 06:15:55
Hi, Can you tell me how to do the pedal test?
Title: Re: pedal test
Post by: fiend61 on 03 March 2012, 08:40:31
seek and you will find  :y

http://www.omegaowners.com/forum/index.php?topic=90581.0
Title: Re: pedal test
Post by: HockeyDave55 on 03 March 2012, 09:32:35
seek and you will find  :y

http://www.omegaowners.com/forum/index.php?topic=90581.0

Ooops! Sorry, I should look harder... Many thanks fiend61...
Just fixing up the Omega for it's MOT to get it back on the road... (1st time in 3 years!)
Much work to do and I want to run the P/C test just to see if anything's wrong with the old girl....
Thanks again....
Title: Re: pedal test
Post by: simmy on 03 March 2012, 22:35:53
TURNS OUT WAS A FAULTY AIR FLOW SENSOR GOT RAC TO DO DIAGNOSTIC..SO FINGERS CROSSED GARGE REPLACING PICK IT BACK UP TOMORROW
Title: Re: pedal test
Post by: albitz on 03 March 2012, 22:43:42
Replace it yourself.5 minute job.Only tool needed is a screwdriver. :y
Title: Re: pedal test
Post by: bored bigyin54 on 03 March 2012, 22:53:48
TURNS OUT WAS A FAULTY AIR FLOW SENSOR GOT RAC TO DO DIAGNOSTIC..SO FINGERS CROSSED GARGE REPLACING PICK IT BACK UP TOMORROW
no need to shout :y :y :y :y
Title: Re: pedal test
Post by: bored bigyin54 on 03 March 2012, 22:55:17
the RAC work sometime not always :y :y :y :y
Title: Re: pedal test
Post by: feeutfo on 04 March 2012, 00:15:37
maf code is 0100

10 flashes = zero

So that code would read 10 flashes 1 flash 10 10 any more than 10 is a miss count. Continuous flashing means no codes.

Title: Re: pedal test
Post by: feeutfo on 04 March 2012, 00:17:40
maf code is 0100

10 flashes = zero

So that code would read 10 flashes 1 flash 10 10 any more than 10 is a miss count. Continuous flashing means no codes.


Although having said that, the 2.2 pedal trick doesn't work apparently, so there's no reason the rules would be the same I guess.
Title: Re: pedal test
Post by: albitz on 04 March 2012, 09:14:09
Afaik it will work on some 2.2,s but not on all of them.