Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: venom on 02 March 2012, 20:28:32
-
I have found a CDC2 (thanks to Lincs Robert) but I need the CD side of the loom as some B*****D has cut the plugs off my loom when they took out the old CD unit >:( >:(
-
I've found out fromTB that I need a loom for a CCR800 from a MFL please :'( :'( :'( :'( :'(
-
How much cable has been cut off the loom that was in your car?
If it's only a short length then you could splice on a section with the CD connector from a CCR600 unit. This means that your source could be a CDX or MV6 rather than Elite with a CCR800.
HTH - Rob
-
How much cable has been cut off the loom that was in your car?
If it's only a short length then you could splice on a section with the CD connector from a CCR600 unit. This means that your source could be a CDX or MV6 rather than Elite with a CCR800.
HTH - Rob
Perfect then, OK so I'm after the cd connectors from a CCR600 :y
-
Ken,
How much of the cable has been cut off from the loom in your car?
The CD connector loom goes into a bundle with the bose amp which is behind the trim panel in the area of the fuel filler cap. I'd be very surprised if more than a foot or so has been cutoff. My point being that you almost certainly dont need a whole Bose/estate loom which will be a pain to get hold of - but about a foot (or whatever) of cable with the CDC2 connector on and a simple bit of splicing to the cable that's already in place in your car.
I "might" even know of somewhere I can get this for you :y.
TTFN - Rob
-
Yeah I reckon about just under a foot, I asked for the loom because I thought a whole loom would've been easier to get hold of rather than just the plugs :y
-
The whole loom is quite a significant bit of cabling - whereas the plug (with a short length of cable) can be hacked off from an existing car and the cable joined - then all you have to do is splice the cables.
Fingers crossed I can get hold of one for you in the next few days. :y
-
Top geeza :y :y
-
Hi Ken,
Looked @ the car today - somebody had beaten me to it I'm afraid.
Hope you got on with Dirk ok?
Thanks - Rob
-
Hi Ken,
Looked @ the car today - somebody had beaten me to it I'm afraid.
Hope you got on with Dirk ok?
Thanks - Rob
Oh B******S :'( cheers anyway Robert, yeah nice guy :y
-
Can anyone help me out here :'(
-
ive got a facelift loom for bose if any use, but dont think it has the cdc plugs on this type
-
Can anyone help me out here :'(
http://www.omegaowners.com/forum/index.php?topic=100332.0 :-\
-
Yeah already spoken to twiglet but he's selling the whole system I only need the loom or just the plugs
-
Yeah already spoken to twiglet but he's selling the whole system I only need the loom or just the plugs
I might be persuaded to sell the loom seperately, depending on price. Not sure if it will be any good for you though, after what TB said about the CCRT700 having a different loom to the CCR800. :-\
-
I did just double check with TB and he says that the plugs are the same for the CCRT700 & the CCR800 but the loom is wired differently on the CCRT700 :'(
-
There was a saloon in at smiths of bloxham last week that had bose fitted and looked complete even had dim dip mirror still in it ;D
-
Blinding I'll give them a call tomorrow cheers :y