Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: AndyD_1961 on 05 March 2012, 14:31:31
-
Hi
I have a 2.2 petrol and have just bought a 3.2.
Now when you turn on the ignition on the 2.2 the spanner light comes on and goes out after a few seconds and the engine light goes out after starting.
The 3.2 is the complete opposite spanner stays on till started and the engine goes out after a few seconds.
The owners manual says they should be the same.
Can someone with a 3.2 let me know if mine is right
Andy
-
light will stay on until car started
once car started lights should go out
indicating alll is well
-
Are you saying that the one with spanner symbol is staying on while driving? Thats the service light. When i had that the steering felt slightly heavier, fuel consumption was massive also.
I went to the garage who put it on diagnostics and it turned off but i still had a service completed a week later.
The other light is engine managment. As Tango said, if they both go out on start up you have nothing to worry about.
-
Hi
They both go out once started but the owners manual says that the 2.2 and the 3.2 should do the same and mine are completely opposite.
I know the 2.2 is right it does as it says in the manual so am hoping someone with a 3.2 will tell me what theirs does on turning on the ignition
-
Are you saying that the one with spanner symbol is staying on while driving? Thats the service light. When i had that the steering felt slightly heavier, fuel consumption was massive also.
I went to the garage who put it on diagnostics and it turned off but i still had a service completed a week later.
The other light is engine managment. As Tango said, if they both go out on start up you have nothing to worry about.
No such thing as a service light on an Omega.
The spanner light, staying on, on a 2.2 means you have a fault, you need to ger it diagnosed with a code reader, and report back here with the codes.