Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: astroblaster on 08 March 2012, 22:48:46

Title: Poly bushes
Post by: astroblaster on 08 March 2012, 22:48:46

hi all just looking on the powerflex website at these http://www.powerflex.co.uk/product-details/Front+Wishbone+Front+Bush/1760.html, my question is do i need 2 of these one for each wishbone or will that one pack do both sides

Thanx john :y

Title: Re: Poly bushes
Post by: feeutfo on 08 March 2012, 22:50:03

One pack. (holds two front wb bushes) :)

Title: Re: Poly bushes
Post by: astroblaster on 08 March 2012, 23:05:44

thanx chris not going to cost as much as i thought then :y, would it be worth having these done as well Front Anti Roll Bar To Chassis Bush 26mm

Title: Re: Poly bushes
Post by: feeutfo on 09 March 2012, 05:20:37

Most Important thing is make absolutely certain the wishbone ball joint and rearward bush are sound before fitting polly. Although iirc where you talking about new wb's anyway?

Title: Re: Poly bushes
Post by: astroblaster on 10 March 2012, 01:16:09

no there not new ones there the old vx ones ive had taken off :)

Title: Re: Poly bushes
Post by: Seth on 10 March 2012, 01:25:57

Gotta agree that the Powerflex site is a tad misleading as regards actual quantities.

If you require the rearward (vertical) bush, and/or ball-joints, then I've got a pair of each here.
Febi IIRC.

Title: Re: Poly bushes
Post by: astroblaster on 10 March 2012, 01:35:54

thanx for that seth will get back to you about them when ive had the wb's checked out

Title: Re: Poly bushes
Post by: Seth on 10 March 2012, 01:40:52

Quote from: astroblaster on 10 March 2012, 01:35:54

thanx for that seth will get back to you about them when ive had the wb's checked out

OK - just let me know. HTH! ;)