Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: aitch015 on 09 March 2012, 18:06:45

Title: bonnet release lever
Post by: aitch015 on 09 March 2012, 18:06:45

,Hi guys,
Just wondering if anyone has a picture of the bonnet release handle assembly fitted to the car. I think a piece of mine must be broken or missing because i just can'get the thing re-fitted to the car. The pictures show what i have and were i think it goes.
Thanks
Martin
(http://db.tt/eRSLdcL3)
(http://db.tt/92W6uZL3)

Title: Re: bonnet release lever
Post by: Agemo on 09 March 2012, 20:41:55

Long time since I did mine, but I do remember it was a pain.  >:(

There may well be nothing missing or broken on yours.

Title: Re: bonnet release lever
Post by: Murph on 10 March 2012, 02:40:13

My cable has snapped right next to the lever.

I have a Carlton (Omega A ::)  ) cable spare and it looks to be the same, so I'll try fitting that.
Anyone want to place bets on a successful outcome?    ;D

Title: Re: bonnet release lever
Post by: robson on 10 March 2012, 08:20:11

There was a post on this about a week or two ago

Title: Re: bonnet release lever
Post by: freecall666 on 10 March 2012, 08:34:11

well looking at the picture its not broken, try some white grease on the plastic runner locator. put in place (the hole) and push towards the front wile pushing it into the hole. making sure nothing is in the way.

Title: Re: bonnet release lever
Post by: aitch015 on 10 March 2012, 15:13:41

thanks for the replies,

Will give it another go. :y