Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Dr_X on 14 March 2012, 20:40:34

Title: Lambda question
Post by: Dr_X on 14 March 2012, 20:40:34

Hi can someone tell me which lambda sensor is (bank 1 sensor 1) on the car please......fault codes not my strong point and i've got a P0135 code on a 2002 2.6 cd i've just bought.

It's pretty good all in all but the idle is very rough and I've gone through all the vac pipes etc... could a duff lambda be causing the rough idle?????

Title: Re: Lambda question
Post by: TheBoy on 14 March 2012, 21:10:11

Drivers (UK cars), pre cat (so the one on the downpipe)

Title: Re: Lambda question
Post by: doz on 14 March 2012, 21:13:31

Isn't that strange. I had the very same fault code on a Audi 3lt I had. It was a while a go but I'm sure it was nearside (uk) pre cat not offside. Maybe the car manufacturers do this to keep us on our toes.

Title: Re: Lambda question
Post by: RobG on 14 March 2012, 21:15:00

Bank 1 on the mig is offside ;)

Title: Re: Lambda question
Post by: Dr_X on 14 March 2012, 21:17:35

Quote from: TheBoy on 14 March 2012, 21:10:11

Drivers (UK cars), pre cat (so the one on the downpipe)

Thanks for that........ :y   
what do you think about the idle...

Edit...which side?

Title: Re: Lambda question
Post by: Dr_X on 14 March 2012, 21:22:11

Quote from: TheBoy on 14 March 2012, 21:10:11

Drivers (UK cars), pre cat (so the one on the downpipe)

Quote from: RobG on 14 March 2012, 21:15:00

Bank 1 on the mig is offside ;)

 :o

got it.... having spaz moment