Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: HockeyDave55 on 31 March 2012, 15:28:08
-
Hello all, I think I'll change my name to "Problem Child" ;)
Anyway, today I WAS going to fit my cruise control but.... I started with the servo...
After I found where it goes, I removed the Aux Water Pump and put that out of the way (I'm guessing I need a different mount for the pump?)
I then fitted the servo to the inner wing, connected the harness and plugged in the cable to the servo, then I fitted the cable to the bracket on the Plenum Chamber, this is where things get wooly for me.... Is there a different bracket or cable or an adjustment to be made????(http://i556.photobucket.com/albums/ss2/KillerDave/IMG985.jpg)
(http://i556.photobucket.com/albums/ss2/KillerDave/IMG986.jpg)
-
....
I then fitted the servo to the inner wing, connected the harness and plugged in the cable to the servo, then I fitted the cable to the bracket on the Plenum Chamber, this is where things get wooly for me.... Is there a different bracket or cable or an adjustment to be made??..
take the accerator cable off first ie unclip the clip from around the ball & then pul it off (can be a bugger to copme off though) fit the cruise cable on the shaft the accelerator cable has jus come from, then refit the accerator cable. :y
-
....
I then fitted the servo to the inner wing, connected the harness and plugged in the cable to the servo, then I fitted the cable to the bracket on the Plenum Chamber, this is where things get wooly for me.... Is there a different bracket or cable or an adjustment to be made??..
take the accerator cable off first ie unclip the clip from around the ball & then pul it off (can be a bugger to copme off though) fit the cruise cable on the shaft the accelerator cable has jus come from, then refit the accerator cable. :y
Sorry, edit... The actual problem, which I forgot to write is that the inner CC cable doesn't reach the throttle lever... Sorry!
-
Two lengths of Bowden cable. One for short plenum, one for long
-
Is it just the inner that's different?
-
As Rob says the early 3.0 and the 2.5 have a shorter cable than the later long plenum 3.0
-
I'll see if I can find one, Many thanks RobG and Pete! :y
-
I'll see if I can find one, Many thanks RobG and Pete! :y
Think Elite Pete may have one ;D ::)^^^^^^^
-
I'll see if I can find one, Many thanks RobG and Pete! :y
Think Elite Pete may have one ;D ::)^^^^^^^
As if by magic ::) Yep got one or two here :y
Cheers Rob :y
-
I'll see if I can find one, Many thanks RobG and Pete! :y
Think Elite Pete may have one ;D ::)^^^^^^^
As if by magic ::) Yep got one or two here :y
Cheers Rob :y
Thought you might 8)
-
Lol... That is funny!!! PM me and we'll go from there, I don't suppose you have the mount for the Aux Water pump??? ;D
-
Are you retro fitting this unit??? im guessing you've got the indicator cruse Stalk?? 4pin switches for the clutch & brake pedels??
Because i fitted a unit onto mine & stalk but nobody told me i needed 2 more sensor switches to make it work!!!!
-
Yeah, it's all in except the kit I have is from an early 3.0, I am just waiting for the longer actuator cable.