Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Steve B on 04 April 2012, 22:45:03

Title: omegas a
Post by: Steve B on 04 April 2012, 22:45:03

i do a shop run say 8 miles . car gets warmed up . i stop for 2 min then when i restart it sounds like im firing on 3 pots .. then all goes good again..just done new plugs so i no its not them ..and the other day it cut out on tickover.as for dash lights ..it swaps between spanner on the car and the gearbox pic.......any ideas......... :'(

Title: Re: omegas a
Post by: davethediver on 04 April 2012, 23:35:42

My first idea is to get the codes read then we can maybe help with a diagnosis :)

If lights are on there is a fault code logged tell us that and the crystal ball may give a more accurate answer of what's up :y

Title: Re: omegas a
Post by: The Red Baron on 05 April 2012, 00:02:22

not yet another cam sensor problem maybe.

Title: Re: omegas a
Post by: Steve B on 05 April 2012, 13:42:50

ok so ive had my code looked at and deleted.theres lots of them....

..............ENGINE.............

P0170 (2) lean exhaust-not present
p1555 (0) throttle position sensor (tps) load signal not plausable with engine load-not present
p0340 (4) camshaft position sensor circuit no signal-not present
p1700 (0) svs via can-not present
p0335 (8 ) crankshaft sensor incorrect signal-not present

.............transmission........

p1781 (0) unknown dtc-not present
p1625 (2) internal power control final stage low input-not present
p0727 (0) can receives error-not present

now i will see what comes back