Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ree on 11 April 2012, 22:12:00

Title: why does my 2.0 cd rev to high
Post by: ree on 11 April 2012, 22:12:00
hi all ree again as you know got rid of my 3.0 elite now got 2.0 cd auto .on a 99 plate had a long run other day done 180 miles , when i stuck it in neutral it revs to 2,000 / 3,000 revs then goes back to about 800 then just goes up and down between these revs ,dosent do it untill warmed up and then when putting it in gear goes in with a clunk as revs high apart from that lovely drive ,any ideas ?? Ree.
Title: Re: why does my 2.0 cd rev to high
Post by: TheBoy on 11 April 2012, 22:13:43
Sounds like an air leak, but could be some retard has buggered about with throttle butterfly
Title: Re: why does my 2.0 cd rev to high
Post by: ree on 11 April 2012, 22:19:56
did find a hole in the mass air flow meter gaffer taped it up  ;D would that fix it put loads on ?? or does it need replaceing full stop, is my model to old to find codes, and can i upgrade at all if poss ? Ree.
Title: Re: why does my 2.0 cd rev to high
Post by: RobG on 11 April 2012, 22:28:10
did find a hole in the mass air flow meter gaffer taped it up  ;D would that fix it put loads on ?? or does it need replaceing full stop, is my model to old to find codes, and can i upgrade at all if poss ? Ree.
Nope. Paperclip http://www.omegaowners.com/forum/index.php?topic=90581.0
Title: Re: why does my 2.0 cd rev to high
Post by: ree on 11 April 2012, 22:49:40
Thanks guys , will get on it 2mozz can i upgrade have heard something about this but not sure of my omega ?? anyway thanks again gonna wack some pics up at the weekend of the offender lol  :P Ree.
Title: Re: why does my 2.0 cd rev to high
Post by: RobG on 11 April 2012, 23:04:21
Thanks guys , will get on it 2mozz can i upgrade have heard something about this but not sure of my omega ?? anyway thanks again gonna wack some pics up at the weekend of the offender lol  :P Ree.
As in what :-\
Title: Re: why does my 2.0 cd rev to high
Post by: ree on 11 April 2012, 23:19:19
was told may be some software on the gearbox that could be updated ??