Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: oupa on 20 April 2012, 10:12:38
-
Serviced Mig yesterday with help from maintenance guides - thanks to authors. Could not remove 1 spark plug and wasn't keen to apply too much pressure in case stripped thread in head. Any clever ideas anyone?
-
Plusgas or similar down the thread, leave it to soak in. Then apply some more, use a fairly long bar so you can gently increase the pressure, don't go yanking on the end of it though :y
-
Thank you I will it give it a try. Thought of WD 40 or similar but couldn't see how it could work. : :
-
Failing that, get engine up to temp then try to remove plug
-
Thank you I will it give it a try. Thought of WD 40 or similar but couldn't see how it could work. : :
WD40 is no use as a penetrating lubricant. Use Plus Gas. :y
-
Best bet is get the engine upto to temp and retry. :y
-
Best bet is get the engine upto to temp and retry. :y
And mind your fingers...
-
Thank you all for your advice. Will try iy with crossed fingers!