Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Zuffenhausen on 30 April 2012, 18:16:47
-
Hi All,
The drivers side washer is great on our Elite but there is nothing coming from the passenger side. I have poked a pin into the jets to check they are clear, no difference :'(
There are no wet patches around the psaaenger underside of the bonnet so don't think it is a split pipe either.
The MOT is due so need to find a fix quickly.
Thanks
-
As, IIRC, the drivers side tees from passenger, it has to be a blocked nozzle :-\
-
How do I remove the washer jet to give it a good check over?
-
PFL or FL
-
MFL
-
How do I remove the washer jet to give it a good check over?
Squeeze the two tabs on the under side of the jet together & gently lever if from the bonnet.
-
How do I remove the washer jet to give it a good check over?
Squeeze the two tabs on the under side of the jet together & gently lever if from the bonnet.
(http://i84.photobucket.com/albums/k17/Tiff4327/S73F1202.jpg)
-
I also want to know the solution for this problem but I am not getting exactly what to do? Can anyone tell me detailed instruction or process? Please help me!!!
-
take it off and stick it is a jar or vinegar,, then leave it for a bit then blow out opposite way to the use of it. do it back and forth a few times till clear.
-
Before removing jet get a hair dryer up there to soften the two retaining tags or else they are prone to snap off ;)
-
take it off and stick it is a jar or vinegar,, then leave it for a bit then blow out opposite way to the use of it. do it back and forth a few times till clear.
I got my solution because of your comment. I am so glad because of your comment.