Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: spurgindavid on 03 May 2012, 22:58:08

Title: cylinder numbering diagram
Post by: spurgindavid on 03 May 2012, 22:58:08: hello all, would just like to double check on my car as i have changed the dizzy and ht leads and want to make sure i have put the leads into the correct spark plugs :y

does anyone have a diagram or a picture of some sort that shows what number each cylinder is??

Many thanks -

(2.5 v6)
Title: Re: cylinder numbering diagram
Post by: Webby the Bear on 03 May 2012, 23:05:24: the diagram is actually embossed on the cam covers ;)

note also that the disspac doesn't run in the same order so double check the right pot is linked to the right disspac port. diss pac also numbered ;)
Title: Re: cylinder numbering diagram
Post by: spurgindavid on 03 May 2012, 23:13:26: we havent got the cam cover though :'(
Title: Re: cylinder numbering diagram
Post by: The Red Baron on 03 May 2012, 23:16:52: cam cover...
5...6
3...4
1...2

front.
Title: Re: cylinder numbering diagram
Post by: Webby the Bear on 03 May 2012, 23:21:56: :)
(http://i1226.photobucket.com/albums/ee402/webbybear1/kjhb.png)
Title: Re: cylinder numbering diagram
Post by: Webby the Bear on 03 May 2012, 23:23:04: Shizzle. soz RB didnt see youd replied with a much easier method ::) ;D
Title: Re: cylinder numbering diagram
Post by: The Red Baron on 03 May 2012, 23:24:08: beat you. :P
Title: Re: cylinder numbering diagram
Post by: Webby the Bear on 03 May 2012, 23:25:56: Quote from: The Red Baron on 03 May 2012, 23:24:08
beat you. :P

Haven't you got a head gasket to be getin' on with?! :P ::) ;D ;D ;D ;D ;)
Title: Re: cylinder numbering diagram
Post by: The Red Baron on 03 May 2012, 23:28:15: Quote from: Webby the Bear on 03 May 2012, 23:25:56
Quote from: The Red Baron on 03 May 2012, 23:24:08
beat you. :P

Haven't you got a head gasket to be getin' on with?! :P ::) ;D ;D ;D ;D ;)
all done mate, cam covers on in the morning, top end then start up.
Title: Re: cylinder numbering diagram
Post by: Webby the Bear on 03 May 2012, 23:28:40: Quote from: The Red Baron on 03 May 2012, 23:28:15
Quote from: Webby the Bear on 03 May 2012, 23:25:56
Quote from: The Red Baron on 03 May 2012, 23:24:08
beat you. :P

Haven't you got a head gasket to be getin' on with?! :P ::) ;D ;D ;D ;D ;)
all done mate, cam covers on in the morning, top end then start up.

:y :y :y
Title: Re: cylinder numbering diagram
Post by: omega3000 on 04 May 2012, 15:26:19: Quote from: Webby the Bear on 03 May 2012, 23:25:56
Quote from: The Red Baron on 03 May 2012, 23:24:08
beat you. :P

Haven't you got a head gasket to be getin' on with?(http://i266.photobucket.com/albums/ii269/theogrit/1sm106poke.gif) ! :P ::) ;D ;D ;D ;D ;)

;D