Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Steve B on 07 May 2012, 18:35:27

Title: torque settings
Post by: Steve B on 07 May 2012, 18:35:27

is this all correct for a 2002 2.2 petrol


Torque wrench settings...

                                                          Nm                         lbf ft

Coolant pump....................................  25                          28

Timing belt cover bolts:
    Outer cover...................................   6                            4
    Rear cover.....................................  8                            6

Timing belt idler pulley:
    Pulley bolt......................................  25                          18
    Mounting bracket bolts....................  25                          18

Timing belt tensioner bolt....................  20                         15

Title: Re: torque settings
Post by: Mikes1670 on 07 May 2012, 19:04:30

According to my Haynes manual 25Nm equates to 18 lbf ft. But other than that yes those figures are as per Haynes manual. :y

Title: Re: torque settings
Post by: PhilRich on 07 May 2012, 19:29:22

Save these to your PC mate, they may help for the future :y

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines2of3.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines3of3.jpg)

Title: Re: torque settings
Post by: Steve B on 07 May 2012, 21:11:20

Quote from: PhilRich on 07 May 2012, 19:29:22

Save these to your PC mate, they may help for the future :y

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines2of3.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines3of3.jpg)

cheers thanks for that  :y

Title: Re: torque settings
Post by: Steve B on 07 May 2012, 23:11:17

Quote from: bigtimecube on 07 May 2012, 18:35:27

is this all correct for a 2002 2.2 petrol


Torque wrench settings...

                                                          Nm                         lbf ft

Coolant pump....................................  25                          28

Timing belt cover bolts:
    Outer cover...................................   6                            4
    Rear cover.....................................  8                            6

Timing belt idler pulley:
    Pulley bolt......................................  25                          18
    Mounting bracket bolts....................  25                          18

Timing belt tensioner bolt....................  20                         15

i agree...readings were took from a previous post on here