Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: SMD on 15 May 2012, 17:19:30

Title: Cats to midsection bolt size
Post by: SMD on 15 May 2012, 17:19:30

As above, what size is it. Had a look but can't be sure if its M8 or M10

Thanks

Title: Re: Cats to midsection bolt size
Post by: Darth Loo-knee on 15 May 2012, 17:47:45

8mm  :y

Title: Re: Cats to midsection bolt size
Post by: SMD on 15 May 2012, 17:59:49

Thanks. If I was to take a 8mm dril bit and drill out the thread on the flange, 8mm bolt should go through it. Any reason not to do this?