Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bigGmv6 on 29 May 2012, 18:16:12

Title: timing marks....
Post by: bigGmv6 on 29 May 2012, 18:16:12
This may be a silly question, but just fitted a new belt and tensioner and water pump.. cars running and seems to be going well..  but checked timing marks with the timing tool that comes in the locking kit,  marks are a little out, as in they are on the edges of the marks on the tool rather than dead center, is this ok?
Title: Re: timing marks....
Post by: feeutfo on 29 May 2012, 18:26:46
A picture maybe? 0.5mm or half the width of the mark itself won't matter, for example.