Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Cav9_4 on 10 April 2008, 16:19:35
-
Hi,anyone idea what i could be,just looked at Omega,320 Nm,looks like having to buy a new torque wrench too!
-
Hi,anyone idea what i could be,just looked at Omega,320 Nm,looks like having to buy a new torque wrench too!
It's times like this when I do a bit of mental arithmetic and work out how far a long the breaker bar a 15 stone bloke needs to be... :-X
Kevin
-
Hi,anyone idea what i could be,just looked at Omega,320 Nm,looks like having to buy a new torque wrench too!
It's times like this when I do a bit of mental arithmetic and work out how far a long the breaker bar a 15 stone bloke needs to be... :-X
Kevin
lol ;D
-
Hi,anyone idea what i could be,just looked at Omega,320 Nm,looks like having to buy a new torque wrench too!
Its a very different setup to the Omega being front wheel drive with CV joints.
So:
Wheel bearing unit to steering knuckle bolts (3 off) 130Nm with thread lock.
Cv joint to wheel bering unit retaining bolt (1 off) 160Nm.
When fitting the unit, I seem to recall that the ABS senosr wire needs to be at 6 Oclock so check its location when you take the old one off.
-
Hi,anyone idea what i could be,just looked at Omega,320 Nm,looks like having to buy a new torque wrench too!
It's times like this when I do a bit of mental arithmetic and work out how far a long the breaker bar a 15 stone bloke needs to be... :-X
Kevin
From my experiance, a lot more than 320Nm.... ::)
-
235 ft.lb. 210 lb of bloke, so about a foot and a bit along the breaker bar. :y
Kevin
-
235 ft.lb. 210 lb of bloke, so about a foot and a bit along the breaker bar. :y
Kevin
Yes but, only a fool pushes down with thier full boy weight on a breaker bar........ :o
-
.....
Yes but, only a fool pushes down with their full boy weight on a breaker bar........ :o
Was that a clue or a typo? ;)
-
235 ft.lb. 210 lb of bloke, so about a foot and a bit along the breaker bar. :y
Kevin
;) Pssst: let`s torque about it! ;D