Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Omega6pot on 16 June 2012, 21:28:50

Title: 3.2 auto to manual..... can i get TC to work again?
Post by: Omega6pot on 16 June 2012, 21:28:50

Hi, i have a 3.2 that has been manualled, just wondering if i put a manual loom in it and change the abs ecu to a manual one will the traction control work?

Title: Re: 3.2 auto to manual..... can i get TC to work again?
Post by: 2woody on 16 June 2012, 21:35:10

you should have a date with a tech2 guru - as far asa I know, you need no hardware mods at all.

there isn't anything different in the looms, neiter is there a different ABS ECU required.

Title: Re: 3.2 auto to manual..... can i get TC to work again?
Post by: Omega6pot on 16 June 2012, 21:37:52

ooohhh sounds like good news, must ask the mate to borrow his works one. It could really do with traction control its fond of spinning the rubber boots off itself at the first hint of dampness

Title: Re: 3.2 auto to manual..... can i get TC to work again?
Post by: serek on 17 June 2012, 22:20:08

Quote from: Omega6pot on 16 June 2012, 21:28:50

Hi, i have a 3.2 that has been manualled, just wondering if i put a manual loom in it and change the abs ecu to a manual one will the traction control work?

thaction control will work any way ,
but like 2woody say you can chenge set up on ACS/TC ecu by tech 2 or op com