Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: scorpius92 on 01 July 2012, 17:55:01

Title: Work shop manual
Post by: scorpius92 on 01 July 2012, 17:55:01

Hi guys I need to change the front disc and pads on my 2002 2.6 elite. Is there a Haynes manual that covers that model. I've look and they only go up to a  t plate. If not are the disc+pads easy to change. Cheers mark.

Title: Re: Work shop manual
Post by: albitz on 01 July 2012, 17:59:02

Manual for earlier models will be the same as far as brakes are concerned. Changing discs/pads is straightforward.
Couple of bolts hold calipers in place.Torx screw holds disc in place.Thars about it really.If you need any advice on anything half way through,just log on and ask. :y

Title: Re: Work shop manual
Post by: RobG on 01 July 2012, 18:01:51

http://www.omegaowners.com/forum/index.php?topic=90538.0

Title: Re: Work shop manual
Post by: scorpius92 on 01 July 2012, 19:17:28

 :y