Omega Owners Forum
Chat Area => Omega Gallery => Topic started by: OmegaAnglesey on 03 July 2012, 17:24:22
-
Here is where i bought it from... http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_765091_categoryId_165537_langId_-1?cm_sp=Intelligent_Offer-_-Product_Details_Zone_1-_-Blank&iozone=PDPz1 (http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_765091_categoryId_165537_langId_-1?cm_sp=Intelligent_Offer-_-Product_Details_Zone_1-_-Blank&iozone=PDPz1)
It does stick out a fair bit but i cant cut anymore of the exhaust :-\ Does it look OK ?
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/b101efa9.jpg)
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/9fbd9f0f.jpg)
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/8bc11916.jpg)
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/0439a9af.jpg)
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/67166081.jpg)
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/63d3230c.jpg)
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/fe9aad7e.jpg)
(http://i1158.photobucket.com/albums/p620/Agemo_Legend/5a8eca6f.jpg)
-
Its stainless steel apparently.
-
Sticks out way too far in my opinion
-
Sticks out way too far in my opinion
Yeah i know :( , Not much i can do about it tbh :-\
-
Looking at the pictures from underneath. Could you cut a little off the exhaust with a slitting disc, say an inch :-\
-
thats what i did with mine as mine stuck out to far and mine has a fixing pooint half way down the output pipe so i had to trim the exhaust and the new trim to make it fit :y otherwise mine would stick out way to far like (cough) that (cough) no offence :-\
-
Can't you chop a bit from the tip itself? It looks good other than that :y :y
-
Well i've managed to get it in more by 1" or so (elbow grease was required) and does look Good now will get some more pics up tomorrow if it isn't raining that is, its pi$$ing down here now ::)
-
I would highly recommend this exhaust attachment its very well made and finished to a high quality for price :y
-
Looks sweet,maybe just a little trim...!!!! :y
-
I would highly recommend this exhaust attachment its very well made and finished to a high quality for price :y
Looks very good , wont fit my twin exit :( Mig welder to the rescue ;D :y
-
Like it :y
-
Looks good mate :y
-
Haven'[size=78%]t had a chance to take new pictures today due to [/size][size=78%]a tragic incident [/size][size=78%]which took the life of my 17 year old cat [/size] :'(
-
Like it :y
Thanks Mate :) Looks good mate :y
Thanks Mate :)
:) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) ;D
-
why dont you just buy a back box, or a full system for it, would look and sound better, in my opinion :y
-
why dont you just buy a back box, or a full system for it, would look and sound better, in my opinion :y
Like a lot of people these days, boils down to having the pennies available to do it :(
-
why dont you just buy a back box, or a full system for it, would look and sound better, in my opinion :y
Like a lot of people these days, boils down to having the pennies available to do it :(
exactly unfortunately mate
-
tiss a shame cos i actually chucked away a complete full powerflow system in the skip off my 3.0l MV6, couldn't be bothered to sell it lol, would of sorted you out a treat
-
tiss a shame cos i actually chucked away a complete full powerflow system in the skip off my 3.0l MV6, couldn't be bothered to sell it lol, would of sorted you out a treat
All I can say to that is "Thats Life" ;D
Yep a real shame wouldn't mind a proper box :y