Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: duke101 on 17 July 2012, 09:42:04

Title: Help needed with setting up a cheapo Tech2
Post by: duke101 on 17 July 2012, 09:42:04

I have bought a "cheapo Tech2" which has come with a CD containing latest software...I am no computer expert and I get so far into installing it then get stuck...i really would like to get this item working to look up fault codes etc...can anyone help me get it working ,i can post it to you with the disc etc if your not local to Lincoln. Thanks

Title: Re: Help needed with setting up a cheapo Tech2
Post by: freecall666 on 17 July 2012, 10:28:30

if its an "My Naff Code Reader" cheapy (copy) you will not get any help on here with it,

Title: Re: Help needed with setting up a cheapo Tech2
Post by: henryd on 17 July 2012, 11:50:53

Quote from: freecall666 on 17 July 2012, 10:28:30

if its an "My Naff Code Reader" cheapy (copy) you will not get any help on here with it,

As said you can't ask here as software is illegal.

Title: Re: Help needed with setting up a cheapo Tech2
Post by: Andy B on 17 July 2012, 12:33:55

Quote from: henryd on 17 July 2012, 11:50:53

Quote from: freecall666 on 17 July 2012, 10:28:30

if its an "My Naff Code Reader" cheapy (copy) you will not get any help on here with it,

As said you can't ask here as software is illegal.

Don't forget that there are other 'Cheapo Tech II's' out there other than the one that ends in com & begins with Op.  ;) ;) ;)