Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Eighth_dwarf on 26 July 2012, 09:33:39

Title: Gearbox Problems
Post by: Eighth_dwarf on 26 July 2012, 09:33:39

Ok, finally got around to putting the the original radio & cd player in (CCR600 changed from a CAR400) and struggling to run all the wires etc through. Problem now is that I seem to have done something to the garbox in the process as all was fine before I started.

There are now no selector lights lighting up and MID shows the dreaded "Automatic Gearbox"

The question is, have I Just managed to blow a fuse for the box ecu or is there any gearbox related plugs behind the radio that I may have disconnected? Something simple like that? or is this something that has just decide to go wrong at this time?

Selector lights not lighting up suggest to me a fuse or conection but I am no expert!

Please help!

Nick

Title: Re: Gearbox Problems
Post by: freecall666 on 26 July 2012, 14:11:16

you may have pulled the wire out when doing the radio, think if you take of the gear selector should see the plug, but may be wrong.

Title: Re: Gearbox Problems
Post by: Eighth_dwarf on 31 July 2012, 11:09:55

Update:

Well tried disconnecting battery overnight to reset everything - no joy
Tried wiggling wires checking pugs on Gearbox ECU - no joy
Pulled all fuses to check for blown ones - all fuses ok - now gaerbox selector lights on and all is working fine again!!!???

Completely confused me, but not going to complain as all working again now!