Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymienets on 31 July 2012, 12:00:27

Title: Brake pipes 2.2CD
Post by: Raymienets on 31 July 2012, 12:00:27

Last MOT advisiry both nearside brake pipes corroded. Anyone got any idea of the size to get them replaced. Local auto shop does the pipes but not got the sizes. Cheers in advance.

Title: Re: Brake pipes 2.2CD
Post by: freecall666 on 31 July 2012, 22:52:34

check them they love to put that on advisiry, had mot with that on 5 years back, so had a look and they were fine just the seal over the brake line had gone so gave them a good clean and paited them in metal seal its like hammerite and have never had it on mot advisiry again.

Title: Re: Brake pipes 2.2CD
Post by: dbug on 31 July 2012, 23:09:08

Check its only surface rust (if deeper rust then replace!!)
Clean off rust with wire wool and apply grease or copperslip  :y

Title: Re: Brake pipes 2.2CD
Post by: freecall666 on 01 August 2012, 01:42:12

22 gauge is size  :)

Title: Re: Brake pipes 2.2CD
Post by: Raymienets on 01 August 2012, 10:54:29

Cheers will just scrub up rather than replace .See how it goes.