Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MV6Danny on 03 August 2012, 20:27:55

Title: oil cooler torque settings
Post by: MV6Danny on 03 August 2012, 20:27:55

Hi can anyone tell me what the torque settings are for the oil cooler oil pipes to the oil cooler. The hollow bolts that let the oil pass through them. Cheers guys

Title: Re: oil cooler torque settings
Post by: amba on 03 August 2012, 20:53:34

30 nm same as the large nuts that secure the actual cooler to the plate.20nm for the cooler plate. :y

Title: Re: oil cooler torque settings
Post by: Andy H on 03 August 2012, 20:58:59

I printed a copy of V6 Torque Values (http://www.omegaowners.com/forum/index.php?topic=90519.0) which I keep with my torque wrench  :y

I cannot see a figure for the oil cooler banjo bolts though :( chances are it is the same figure as for the coolant bridge bolts (seeing as they are probably the same part number ::)). Thing is I prefer not to take chances with banjo bolts :-\

Title: Re: oil cooler torque settings
Post by: MV6Danny on 03 August 2012, 21:26:32

Cheers guys. i couldnt find it on the v6 torque values either thats why i asked  :y

Title: Re: oil cooler torque settings
Post by: dbug on 03 August 2012, 23:48:33

Quote from: Andy H on 03 August 2012, 20:58:59

I printed a copy of V6 Torque Values (http://www.omegaowners.com/forum/index.php?topic=90519.0) which I keep with my torque wrench  :y

I cannot see a figure for the oil cooler banjo bolts though :( chances are it is the same figure as for the coolant bridge bolts (seeing as they are probably the same part number ::)). Thing is I prefer not to take chances with banjo bolts :-\

No - they are different part numbers and not interchangable!!  Same torque though :y