Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: MV6Danny on 04 August 2012, 21:23:39
-
Hi guys putting my car back together today after changing heads new timing belt water pump ect.
I am a bit baffled now as at the back of the engine on top of the fuel injectors i have what looks like an actuator on the fuel lines as pictured below was wondering if this should have something connected to it? I cant find anything but maybe i am not looking hard enough. Can anybody tell me if something should be connected to it. Thanks :y
(http://i1105.photobucket.com/albums/h355/dantheman1978/2012-08-04202938.jpg)
(http://i1105.photobucket.com/albums/h355/dantheman1978/2012-08-04203005.jpg)
-
Fuel pressure regulator (FPR). The pipe leading from the bag pipes to the IACV should have a branch off about 8mm diameter and moulded into the IACV supply pipe. This fits into a couple of clips underneath the cable tray on passenger side and connects to the FPR.
-
Fuel pressure regulator (FPR). The pipe leading from the bag pipes to the IACV should have a branch off about 8mm diameter and moulded into the IACV supply pipe. This fits into a couple of clips underneath the cable tray on passenger side and connects to the FPR.
sorry to sound stupid rob but what does that mean?
-
Fuel pressure regulator (FPR). The pipe leading from the bag pipes to the IACV should have a branch off about 8mm diameter and moulded into the IACV supply pipe. This fits into a couple of clips underneath the cable tray on passenger side and connects to the FPR.
sorry to sound stupid rob but what does that mean?
Idle Air Control Valve (ICV) Arrowed red
(http://i190.photobucket.com/albums/z257/belisensis/OmegaEngineICV-1.jpg)
-
Yes i got it now. I know what you are on about now. Its because i havent fitted it back to the car that i cant find it. ::)
Thanks again Rob :y