Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Becker on 11 August 2012, 17:12:28
-
just wondering were the part number location is on a 2.5 v6 dis pack? and does it have to be removed?
-
Normal identification is by the shape of the plug and its location.
Oval or oblong mounted at the end nearest center of the heads...alternative is plug located in the side....only 3 variables.
From my experience with the 2 Omegas I have owned,the plug on the dispack is the same shape as that fitted to the crank sensor plug .Bosch are the manufacturer.
Does yours require renewing then ?
-
i think so, there is a misfire, already changed plugs and leads, so now on to the pack, only prob is cant afford to have the car off the road at the min, thanks for the help lad much appreciated!
-
This is the one off my '98 2.5:
(http://i16.photobucket.com/albums/b9/daymurphy/20120811_192017.jpg)
The only part number I could find on it is on the top between pins one and three:
(http://i16.photobucket.com/albums/b9/daymurphy/20120811_192131.jpg)
The number reads 0221503017
HTH.
-
That number is a Bosch part number, and any motor factor will be able to cross it to whatever supplier they use. As will Google, or probably Ebay.
-
Try this site for partnumber: http://opeloem.com/
The eksakt page would be: http://opeloem.com/vauxhall/omega_1994_2003/electrical/engine_and_cooling/ignition_coil/x25xe_x30xe_engines.html
-
thanks lads, help much appreciated!