Omega Owners Forum
Chat Area => General Car Chat => Topic started by: Webby the Bear on 14 August 2012, 20:15:21
-
Hi guys,
Was just trying to get these head bolts off and they're still on. but to be fair i havent had a chance to get a socket adapter for my breaker bar.
So anyway i had the bagpipes to hand so i thought i'd get a look at the MAF sensor as i'd never seen one...
(http://i1226.photobucket.com/albums/ee402/webbybear1/maf2.jpg)
it looks like a SIM card. Weird as i thought it was just a piece of wire ::)
when you replace the MAF do you just replace the ''SIM'' or does the unit extract sideways out of the bagpipe tube? :)
-
Didnt realise it had a card in it ... :y
-
Didnt realise it had a card in it ... :y
this is the MAF sensor, right?? :-[ :-[ :-[ :-[ :-[
-
Didnt realise it had a card in it ... :y
I think so looking at the grid , never seen it from that angle close up :) :y
-
Didnt realise it had a card in it ... :y
I think so looking at the grid , never seen it from that angle close up :) :y
;)
as i said i peered right down and it's a little sim card looking thing. looks delicate :o
-
Didnt realise it had a card in it ... :y
I think so looking at the grid , never seen it from that angle close up :) :y
;)
as i said i peered right down and it's a little sim card looking thing. looks delicate :o
It is.................and you replace the complete unit (http://i190.photobucket.com/albums/z257/belisensis/30MAF.jpg)
-
nice one robertbro ;)
can you clean with carb cleaner?
-
nice one robertbro ;)
can you clean with carb cleaner?
Don't try it mate - usually ends in tears ;)
You can just replace the MAF sensor - undo the two screws in Robs pic and old maf sensor comes out - refit new and refit screws - jobs good ;)
-
I thought you were going to treat us with some scope images through the the rev range :D
-
lol soz mate.... i only took this photo cos i lost round 2 with the head bolts :-[ ::)