Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Cumbria on 26 August 2012, 23:23:51

Title: Wanted aerial pre face lift saloon.
Post by: Cumbria on 26 August 2012, 23:23:51

I don't supose anyone's got an aerial for a 1999 pre facelift saloon. Some little scrotes snaped mine off. TIA

Title: Re: Wanted aerial pre face lift saloon.
Post by: Cumbria on 26 August 2012, 23:52:11

I forgot to say it's for a CCRT 700 stereo with built in phone. I don't know if there's difference in aerials.

Title: Re: Wanted aerial pre face lift saloon.
Post by: TheBoy on 27 August 2012, 11:50:46

Have a feeling the screw in bit is the same?  Can you post a pic of whats left on your roof?

Title: Re: Wanted aerial pre face lift saloon.
Post by: Cumbria on 27 August 2012, 13:18:44

I will do.

Title: Re: Wanted aerial pre face lift saloon.
Post by: Cumbria on 27 August 2012, 22:39:02

I hope these pics help.

(http://i582.photobucket.com/albums/ss268/cumbria_photos/DSCN0230.jpg)
(http://i582.photobucket.com/albums/ss268/cumbria_photos/DSCN0229.jpg)

Title: Re: Wanted aerial pre face lift saloon.
Post by: RobG on 27 August 2012, 22:48:14

Think "Albitz" may have one

Title: Re: Wanted aerial pre face lift saloon.
Post by: Andy B on 27 August 2012, 23:41:53

I noticed the other day that I could do with a new one too, the metal ferule at the end that the end of mine, that screws to the bit in the picture, has started to come away from the rubber mast.  :(

Title: Re: Wanted aerial pre face lift saloon.
Post by: albitz on 27 August 2012, 23:56:55

I have one from an 02 elite which had satnav. Not sure if the ariel will be the same ?  :-\

(http://i1238.photobucket.com/albums/ff500/Albs59/DSCF1365.jpg)

Title: Re: Wanted aerial pre face lift saloon.
Post by: Cumbria on 28 August 2012, 00:23:12

Hi Albitz they look the same. I think i will wait for confirmation off someone. How easy do they come off so i can try and compare the conectors. Thanks.

Title: Re: Wanted aerial pre face lift saloon.
Post by: albitz on 28 August 2012, 01:23:04

Ease the headlinig back and undo the nut and undo the connector.Then lift the ariel out from the top. :y