Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: spudmariner on 30 August 2012, 22:49:28

Title: More on Dti fault codes
Post by: spudmariner on 30 August 2012, 22:49:28

Hi all, just had the car put on diagnostics again. Seems like its going through the menu. Now showing MAF fault (ordered already). Also showing PO400 & P1590. Had them cleared but back eml back on within 2 mins. Still lack of power but hoping new MAF will cure that. If not, back to the drawing board. Any info on other 2 codes would be appreciated. Thanks. Graham.

Title: Re: More on Dti fault codes
Post by: Marks DTM Calib on 31 August 2012, 08:17:40

How is the EGR valve?......remember this, a fault coded does NOT tell you what has failed, it only tells you what system is reporting an out of range value  :y

Title: Re: More on Dti fault codes
Post by: spudmariner on 01 September 2012, 03:52:16

Hi, I replaced the EGR valve a couple of weeks ago so that should be ok now. Wasn't showing as a fault on the latest printout. Thanks.