Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: sas on 09 September 2012, 21:18:50

Title: engine swap
Post by: sas on 09 September 2012, 21:18:50
can anybody help 2.2 engine packed up so put a 2.0 in left 2.2 ecu in and now got car with spanner in it light on and after about 20 seconds of engine running the auto gearbox comes up on the display any ideas please
Title: Re: engine swap
Post by: RobG on 09 September 2012, 21:21:39
2.2 ECU different to the 2.0. 2.2 has pre-cat sensor, DBW throttle etc.
Title: Re: engine swap
Post by: sas on 09 September 2012, 21:31:14
so what will i need to do
Title: Re: engine swap
Post by: Andy H on 09 September 2012, 21:56:57
If you fitted the 2.2 manifolds and sensors to the 2.0 lump it should work.

4 pots don't respond to the pedal trick so you need to get it on a code reader.
Title: Re: engine swap
Post by: sas on 09 September 2012, 22:28:32
the only thing that is 2.0 is head and block everything else is 2.2
Title: Re: engine swap
Post by: TheBoy on 10 September 2012, 09:22:04
Are *ALL* engine electrics from the 2.2, both HT and low voltage components?
Title: Re: engine swap
Post by: sas on 10 September 2012, 22:17:27
yes everything
Title: Re: engine swap
Post by: TheBoy on 10 September 2012, 22:19:20
ok, I think it needs a reader on it to see what its upset with
Title: Re: engine swap
Post by: sas on 10 September 2012, 23:06:58
yes did that come back to cam sensor
Title: Re: engine swap
Post by: sas on 11 September 2012, 20:47:05
did cam sensor and still the same any ideas please
Title: Re: engine swap
Post by: Andy H on 11 September 2012, 21:09:18
did what exactly?
Title: Re: engine swap
Post by: sas on 11 September 2012, 21:17:19
put another cam sensor in
Title: Re: engine swap
Post by: Andy H on 11 September 2012, 21:26:08
Quote from: Andy H on 09 September 2012, 21:56:57
4 pots don't respond to the pedal trick so you need to get it on a code reader.

Quote from: TheBoy on 10 September 2012, 22:19:20
ok, I think it needs a reader on it to see what its upset with

You need to read the codes with code reader.