Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: bruceybonus on 19 September 2012, 19:07:39
-
Just had the battery off for a few days whilst being fixed and now the radio is showing safe...
I was under the impression that the code did not need to entered as the unit was paired to the ecu and I don't have the car pass...
Any ideas how I can get it to work? I've had the battery off before an it's been fine
Cheers
Bruce
-
Sounds like CID has lost its pairing to H/U :-\
-
Been a run of this happening lately :-\ :-\
You are correct, it shouldn't need anything doing but (as Tunnie said) it sounds like something has lost it's pairing.
You'll need a Tech 2 session with either TheBoy or Kevin Wood but might have to get a car pass first ;)
-
I believe my 2013/gid was the first it happened to,then jusme had it happen recently also. Afaik it shouldnt happen,but apparently it now does. :-\
-
bloody vx garage want 50 quid to re-pair it! that really is taking the p@ss
-
bloody vx garage want 50 quid to re-pair it! that really is taking the p@ss
Might be worth a trip to TB, might cost quite a bit in fuel/tech2 but you will have someone who knows what they are doing! :y
-
Been a run of this happening lately :-\ :-\
Not sure if related, but as an observation, we have noticed that a lot of the Eeproms used in Philips radios of around the same era for storing radio presets are starting to fail at an alarming rate - many of the radios also use these Eeproms for storing code/pairing data. I guess they are coming to the end of their natural life?
:-\