Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: doz on 01 October 2012, 18:21:45
-
Does the colour display use a different disc to GID when using the Sat Nav? When I select map view it just comes up blank. Everything else seems to work ok.
-
Black screen?
-
Yep. With a little box top left which I guess is for switching between pictograms or maps. Screen is working fine in all other ways
-
12 Pin RGB cable isn't plugged in :y
-
Poo. Yep I only put the one plug in the back of the screen. Didn't see second plug. Will I need to find one a lead now or is it hidden down the dash some where? I had the Sat Nav in the car originally but with a GID. I just swapped the head and screen but the head unit was a like for like swap.
-
Poo. Yep I only put the one plug in the back of the screen. Didn't see second plug. Will I need to find one a lead now or is it hidden down the dash some where? I had the Sat Nav in the car originally but with a GID. I just swapped the head and screen but the head unit was a like for like swap.
Yep, normally taped to the loom coming from the main plug at rear of display
-
Very early facelifts lack the RGB loom if it didn't come with a GID. Later ones, its tucked behind the webbing behind where the screen goes, normally some foam around plug, and masking tape around that.
-
Mines an X plate which came fitted new with a 2013 and GID. I'm guessing I'm in luck with that cable
-
Oh one more question. I take it I don't have to remove the stereo cage and plug this cable in that end as well?
-
Oh one more question. I take it I don't have to remove the stereo cage and plug this cable in that end as well?
Nope
-
Cheers guys. I now have pretty pictures to look at while I drive. :y