Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Michael2.6 on 05 October 2012, 19:42:16

Title: Fault code
Post by: Michael2.6 on 05 October 2012, 19:42:16

I have just had my auto box ecu read and is coming out with code PO742

What can be done about it guys

Thanks Mike,

Title: Re: Fault code
Post by: TheBoy on 06 October 2012, 09:54:50

Fault code implies the system is detecting an abnormality due to what it is seeing happening (rather than a direct sensor/actuator fault), in this case, it thinks the TC clutch solenoid is stuck

Title: Re: Fault code
Post by: briy2 on 06 October 2012, 11:21:48

Is it worth when Mike can get the car out I go back down and take some live data readings before when and after it slams into 4th? took some reading when car was running in neutral while i was there and can post what i have now if it helps

Title: Re: Fault code
Post by: Michael2.6 on 06 October 2012, 21:30:09

PM sent Briy2