Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: richardirv on 06 October 2012, 11:56:32

Title: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 06 October 2012, 11:56:32
I am hopefully acquiring a NCDC 2013 & CID soon, coming out of a (02) 2002 2.6 MV6 and going into a (51) 2002 2.6 MV6 to replace a CCR2006 and MID.

I am aware its not standard or option fit in the MV6 so its been retro fitted into the car and loom modifications required. It will also need De-Bose'ing as I don't have the Bose equipment to go with it at the moment.

I am in need of an expert to fit this for me please, what are my options being in Leeds.

Cheers  ;)
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: RobG on 06 October 2012, 12:30:18
http://home.btconnect.com/nickargue/OmegaSatNav.htm
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 06 October 2012, 12:40:03
I have read that already, it is a good source of info but this job is still looking to much for me. Need a Pro
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: tunnie on 06 October 2012, 12:55:50
TB is your man, but a bit of a drive. I think it would be worth it?
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 06 October 2012, 13:30:05
TB is your man, but a bit of a drive. I think it would be worth it?

I agree, It would be a 325 mile round trip in a day. hehe
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 09 October 2012, 09:46:01
TB is this something you are up for? I really do need your help?  ;)
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: TheBoy on 09 October 2012, 19:07:35
Blimey, Leeds to Brackers is a hell of a trek :o
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 09 October 2012, 21:03:11
Blimey, Leeds to Brackers is a hell of a trek :o

Your not kidding, I am willing to do it if your up for it. Been after a CID for ages at a reasonable price. If you don't / can't do it that's fine, I just don't know anyone else who can do this for me.
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Andy B on 09 October 2012, 21:12:07
Blimey, Leeds to Brackers is a hell of a trek :o

Easily done.
I went to collect SWMBO's Auntie from Edinburgh last Christmas. Set off at 0700-ish, got there 4 hours later, had a brew & a butty & set off home again with said Auntie. Arrived home in time for tea. c200 miles each way. Dead easy in a big car.  ;) ;)
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 10 October 2012, 07:02:57
Blimey, Leeds to Brackers is a hell of a trek :o

Easily done.
I went to collect SWMBO's Auntie from Edinburgh last Christmas. Set off at 0700-ish, got there 4 hours later, had a brew & a butty & set off home again with said Auntie. Arrived home in time for tea. c200 miles each way. Dead easy in a big car.  ;) ;)

hehe. They eat the miles for breakfast don't they..

Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: TheBoy on 10 October 2012, 18:36:51
Blimey, Leeds to Brackers is a hell of a trek :o

Your not kidding, I am willing to do it if your up for it. Been after a CID for ages at a reasonable price. If you don't / can't do it that's fine, I just don't know anyone else who can do this for me.
You got a phone in the car?

You got all the nav aerials?

Can you solder?
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 10 October 2012, 18:53:11
Blimey, Leeds to Brackers is a hell of a trek :o

Your not kidding, I am willing to do it if your up for it. Been after a CID for ages at a reasonable price. If you don't / can't do it that's fine, I just don't know anyone else who can do this for me.
You got a phone in the car?

You got all the nav aerials?

Can you solder?

No phone

GPS aerial present afaik

Not soldered since school
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: TheBoy on 10 October 2012, 19:09:42
Blimey, Leeds to Brackers is a hell of a trek :o

Your not kidding, I am willing to do it if your up for it. Been after a CID for ages at a reasonable price. If you don't / can't do it that's fine, I just don't know anyone else who can do this for me.
You got a phone in the car?

You got all the nav aerials?

Can you solder?

No phone

GPS aerial present afaik

Not soldered since school
Really :o.

What HU is currently fitted?
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: RobG on 10 October 2012, 19:13:42
Blimey, Leeds to Brackers is a hell of a trek :o

Your not kidding, I am willing to do it if your up for it. Been after a CID for ages at a reasonable price. If you don't / can't do it that's fine, I just don't know anyone else who can do this for me.
You got a phone in the car?

You got all the nav aerials?

Can you solder?

No phone

GPS aerial present afaik

Not soldered since school
Really :o.

What HU is currently fitted?
Doubt very much.
Quote
I am hopefully acquiring a NCDC 2013 & CID soon, coming out of a (02) 2002 2.6 MV6 and going into a (51) 2002 2.6 MV6 to replace a CCR2006 and MID.
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 10 October 2012, 19:18:29
Sorry, I ment the GPS aerial is coming with the setup from Brikhead. Not installed in the car. Sorry for the confusion
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: TheBoy on 10 October 2012, 19:32:27
OK, I'm assuming you can run the cables - easy enough, just fiddly in places.  The soldering is fairly trivial, if you can get a ISO36 to ISO36 loom (trafficmaster one is ideal).

Reckon you can do it with a bit of guidance?
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 10 October 2012, 19:37:52
Are you serious I ain't got a clue. LOL. I can't even take a door card off without something snapping.
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Brikhead on 10 October 2012, 20:27:36
The soldering is fairly trivial, if you can get a ISO36 to ISO36 loom (trafficmaster one is ideal).

I have a TM loom, think I mentioned it here...
http://www.omegaowners.com/forum/index.php?topic=107896.15
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 11 October 2012, 08:13:03
Thanks Brikhead  :y
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 15 October 2012, 13:03:57
Ok, so I'm no closer to having a solution here, I would love to be able to do this on my own even with guidance from the forum etc but the truth is I don't have the skill sets to do this properly and I also don't have access to a Tech2..  :-[
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: TheBoy on 15 October 2012, 21:36:21
What do you need a Tech2 for ?
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Brikhead on 15 October 2012, 22:13:09
What do you need a Tech2 for ?

The stereo I'm selling is currently running in Bose mode, 'richardirv' just wants the screen and stereo in his Mv6, he isn't adding the full set-up...
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: TheBoy on 16 October 2012, 20:08:02
What do you need a Tech2 for ?

The stereo I'm selling is currently running in Bose mode, 'richardirv' just wants the screen and stereo in his Mv6, he isn't adding the full set-up...
I thought it was from an MV6 for some reason  :-[
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Elite Pete on 17 October 2012, 08:22:54
What do you need a Tech2 for ?

The stereo I'm selling is currently running in Bose mode, 'richardirv' just wants the screen and stereo in his Mv6, he isn't adding the full set-up...
I thought it was from an MV6 for some reason  :-[

It is but from what I believe the MV6 had been retro fitted with the Bose set up
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: albitz on 17 October 2012, 08:31:59
So why isnt the OP fitting the Bose setup or have I missed something ?  ???
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Elite Pete on 17 October 2012, 08:38:24
So why isnt the OP fitting the Bose setup or have I missed something ?  ???

I think the Bose bits and bobs have already been sold leaving just the head unit and CID ;)
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: albitz on 17 October 2012, 09:24:34
In which case,a wanted ad might solve the problem. :-X :D
Tbh,imo it seems a bit pointless installing the headunit,satnav etc.and then not bothering with the Bose. :-\
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Dave DND on 17 October 2012, 13:18:25
In which case,a wanted ad might solve the problem. :-X :D
Tbh,imo it seems a bit pointless installing the headunit,satnav etc.and then not bothering with the Bose. :-\

Disagree completely ! Adding the NCDxxx head unit wll give a significant navigation upgrade and is well worth doing, and not going for BOSE means you can end up with some decent 21st century sounds.

 ::) :P :-X
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 17 October 2012, 15:27:27
Thanks for filling in the gaps there Pete! I do think most of the relevant information was on my 1st post though  ;)

I would love the Bose setup adding but I don't have it so I can't install it.

Just getting just the CID and 2013 installed seems like a ball buster at the moment though never mind the Bose setup too..  :-[

As for putting a wanted ad. I kinda thought this was, maybe not in the relevant forum area but I don't think it really matters were I put it does it? I will gladly do so If it would help me out  ???
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: albitz on 17 October 2012, 15:48:45
If my post came across as sarcastic Richard,I apoligise.It wasnt meant in that way. :y
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 17 October 2012, 15:56:47
If my post came across as sarcastic Richard,I apoligise.It wasnt meant in that way. :y

I know fella, no need to apologise.  ;)
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: albitz on 17 October 2012, 16:00:24
Cheers.Rich. :y
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 17 November 2012, 14:20:17
Oh well, disappointing outcome for me. Sold to another forum member. No fault of the seller.

Real shame knowone here was willing to help!  :-X
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: zirk on 17 November 2012, 14:54:10
What do you need a Tech2 for ?

The stereo I'm selling is currently running in Bose mode, 'richardirv' just wants the screen and stereo in his Mv6, he isn't adding the full set-up...
I thought it was from an MV6 for some reason  :-[

It is but from what I believe the MV6 had been retro fitted with the Bose set up

Hmm, MV6 2.6 CID and Bose fitted, was it from a Star Silver Saloon, thinking Nick Argues last Mig?
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Brikhead on 17 November 2012, 20:06:44
Hmm, MV6 2.6 CID and Bose fitted, was it from a Star Silver Saloon, thinking Nick Argues last Mig?

Dunno Mate, this is the car...
http://www.omegaowners.com/forum/index.php?topic=102862.15
... I got it back in April from a Chap down in Gillingham.
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: Brikhead on 17 November 2012, 20:11:38
Oh well, disappointing outcome for me. Sold to another forum member. No fault of the seller.

Real shame knowone here was willing to help!  :-X
Like I said, Rich.
It's who you know that counts, not what.

And I am sorry you missed out but I did offer you the chance to secure the item even after the other party had expressed an interest.

Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: zirk on 17 November 2012, 21:10:18
Hmm, MV6 2.6 CID and Bose fitted, was it from a Star Silver Saloon, thinking Nick Argues last Mig?

Dunno Mate, this is the car...
http://www.omegaowners.com/forum/index.php?topic=102862.15
... I got it back in April from a Chap down in Gillingham.

Yep fairly sure thats His old one Rick, Nick was a member on here for a while, NickA from memory, first did a CID and Bose for his 3.0 MV6 Estate and then did the same to his later 2.6 MV6 Silver Saloon.

Also the same guy that wrote the guide that RobG refers to-

http://home.btconnect.com/nickargue/OmegaSatNav.htm

Not that it makes any difference to this thread, was just interested in a MV6 getting Bose. :y
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 19 November 2012, 12:22:50
Oh well, disappointing outcome for me. Sold to another forum member. No fault of the seller.

Real shame knowone here was willing to help!  :-X
Like I said, Rich.
It's who you know that counts, not what.

And I am sorry you missed out but I did offer you the chance to secure the item even after the other party had expressed an interest.



I know fella, like I said, no fault of yours. If I had more skills in this field I would of just taken it but I don't.

Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: TheBoy on 19 November 2012, 12:53:17
Sorry I was unable to commit to fitting. Some days, my back is good, some days its not. I cannot risk someone coming considerable distance on the offchance that I would be capable on a given day. Or worse, feel in a situation that I am compelled to fit it due to the distances involve, and risk further pain/damage.
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: richardirv on 19 November 2012, 13:05:49
No worries  ;)
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: sax-p on 20 November 2012, 23:43:52
This thread will come in handy for fitting the satnav, just a quick one, is the BOSE the speakers in the rear shelf or in the doors?

I'm clueless about the loom?
Title: Re: NCDC 2013 & CID - FITTING NEEDED PLEASE
Post by: albitz on 20 November 2012, 23:51:42
Front doors,rear doors and shelf. 6 of them in total :y