Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: omegaV6CD on 21 October 2012, 12:47:16

Title: Correct Crank Pulley Installation
Post by: omegaV6CD on 21 October 2012, 12:47:16

Hello chaps,
I have just finisshed installing new timing belt on my MV6. Can anyone shed some light as to how do i need to install the crank pulley the correct way? I thought i have to allign the marks of the crank with the pulley but when i removed the pulley it was not installed that way and now i am condused.
Plase help!

Title: Re: Correct Crank Pulley Installation
Post by: Kevin Wood on 21 October 2012, 12:51:20

There's only one position in which all of the bolt holes line up. A mirror on a stick will help. :y

Title: Re: Correct Crank Pulley Installation
Post by: feeutfo on 21 October 2012, 13:23:57

You may find the rust marks on flange will show the orientation.

Title: Re: Correct Crank Pulley Installation
Post by: TheBoy on 21 October 2012, 16:28:44

The marking on the crank, at TDC, points to right edge of crank cover, about 2 o'clock.

You know when its right, all the bolts go in ;D