Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Big_Al on 14 November 2012, 19:17:31
-
I want to fit cruise control to the new MV6 . this is a 2.6 & so DBW
Looks a simple job in the guide & I do understand that once fitted it has to be Tech2 enabled.
But are the DBW car stalks different to the earlier non DBW ones or will any cruise stalk do the job ?
If they are the same . .can I fit it & use it for all other purposes (indicators /main beam etc.) until it is tech 2 enabled ?
I have one sorted . . but it is from a non DBW car :-\ :-\ :-\
TIA Al :y
-
All stalks for petrol the same
-
All stalks for petrol the same
Thanks Rob :y :y
Keep looking out for you on mastermind ! :y
And your specialist subject would be ? The ins & outs in the correct order of course of every Omega ever made . . ever ;D ;D
-
....
And your specialist subject would be ? The ins & outs in the correct order of course of every Omega ever made . . ever ;D ;D
I've got a picture of that!! ::) ::) :y
-
....
And your specialist subject would be ? The ins & outs in the correct order of course of every Omega ever made . . ever ;D ;D
I've got a picture of that!! ::) ::) :y
Naff off you :P :P ;D
-
....
And your specialist subject would be ? The ins & outs in the correct order of course of every Omega ever made . . ever ;D ;D
I've got a picture of that!! ::) ::) :y
Naff off you :P :P ;D
;D ;D ;D ;D
-
....
And your specialist subject would be ? The ins & outs in the correct order of course of every Omega ever made . . ever ;D ;D
I've got a picture of that!! ::) ::) :y
Naff off you :P :P ;D
;D ;D ;D ;D
::) ::) ::)
(http://i1225.photobucket.com/albums/ee386/dbugit/Dog/Test/cruise.jpg)
:) :) ;)