Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Clarkey on 17 November 2012, 15:13:16
-
Noticed when replacing the timing belt signs of a slight coolant leak between the heads. Hoping it's from the thermostat housing but should I lift the oil cooler for a look also?
James.
-
Potential leak points in this area -
Thermostat housing
Oil cooler plate
Coolant bridge dowty seals
Pinholed hose that connects to coolant bridge
HTH :y
-
Use the guide matey :
http://www.omegaowners.com/forum/index.php?topic=90598.0 (http://www.omegaowners.com/forum/index.php?topic=90598.0)
http://www.omegaowners.com/forum/index.php?topic=90671.0 (http://www.omegaowners.com/forum/index.php?topic=90671.0)
http://www.omegaowners.com/forum/index.php?topic=104692.0 (http://www.omegaowners.com/forum/index.php?topic=104692.0)
:y
-
@Johnny. Thanks for links but have just fitted new coolant pump so pressure test is not an option.
@dbung. There are traces of coolant around both oil cooler & thermostat housing so will lift both to be sure.
Cheers.
-
@Johnny. Thanks for links but have just fitted new coolant pump so pressure test is not an option.
@dbung. There are traces of coolant around both oil cooler & thermostat housing so will lift both to be sure.
Cheers.
Check out other potential leak points while you've got it stripped down ;)
-
Leak was from plate over oil cooler. Fitted new thermostat whilst in there. Cheers for info. :y
James.