Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Webby the Bear on 21 November 2012, 17:10:57
-
hi guys. As above mummy bear has reported that the indicators have simply stopped working. No other faults. Recently replaced a headlights bulb if that helps. Whats first port of call? Fuses? Cheers
-
...... Whats first port of call? Fuses? Cheers
Hazard warning switch ....... repeated switch it on & off or swap it with a known to be good switch. ;)
-
...... Whats first port of call? Fuses? Cheers
Hazard warning switch ....... repeated switch it on & off or swap it with a known to be good switch. ;)
About 20 times or so ;)
-
...... Whats first port of call? Fuses? Cheers
Hazard warning switch ....... repeated switch it on & off or swap it with a known to be good switch. ;)
oh. ok, wasnt expecting it to be that easy ;D cheers andy.
those switches just pop out dont they? (like the boot release button)?
cheers
-
...... Whats first port of call? Fuses? Cheers
Hazard warning switch ....... repeated switch it on & off or swap it with a known to be good switch. ;)
oh. ok, wasnt expecting it to be that easy ;D cheers andy.
those switches just pop out dont they? (like the boot release button)?
cheers
Not the hazard one
-
Bit of a pig to get out ime. Havent yet mastered the technique. ::)
-
...... Whats first port of call? Fuses? Cheers
Hazard warning switch ....... repeated switch it on & off or swap it with a known to be good switch. ;)
oh. ok, wasnt expecting it to be that easy ;D cheers andy.
those switches just pop out dont they? (like the boot release button)?
cheers
Not the hazard one
thats jinxed for me saying ''that was easy'' ::) ;D
any idea how to remove/replace it?
-
Back to you all knowing one. :D ;D
-
Back to you all knowing one. :D ;D
:o :o :o :o ;D
-
Pop the front cover off and you`ll see the red "block" plus two lugs (top & bottom). Release both and pull out into cabin. May need a small screwdriver for the lugs as they`re sodding tight.
Have you checked the indicator relay and fuse in cabin fusebox
-
Pop the front cover off and you`ll see the red "block" plus two lugs (top & bottom). Release both and pull out into cabin. May need a small screwdriver for the lugs as they`re sodding tight.
Have you checked the indicator relay in cabin fusebox
Thanks Rob.... so its the little unit with the red block that needs replacing? :y
-
See my edit in above post re; fuse/relay
-
See my edit in above post re; fuse/relay
no mate not yet. ill check those before i touch the hazard button. is this found on the steering column fusebox? :)
-
Pop the front cover off and you`ll see the red "block" plus two lugs (top & bottom). Release both and pull out into cabin. May need a small screwdriver for the lugs as they`re sodding tight.
Have you checked the indicator relay and fuse in cabin fusebox
::) ;D
-
Pop the front cover off and you`ll see the red "block" plus two lugs (top & bottom). Release both and pull out into cabin. May need a small screwdriver for the lugs as they`re sodding tight.
Have you checked the indicator relay and fuse in cabin fusebox
::) ;D
:-[
cheers mate :y
-
ok checked the fuse. (cant find a relay for them) the fuse is fine.
checked the problem for myself and the hazards go on but dont flash. same as the indicators... they come on but dont flash.
so wud it still be this switch thats nackered? if so could one of the breakers supply? :)
cheers.
-
ok checked the fuse. (cant find a relay for them) the fuse is fine.
checked the problem for myself and the hazards go on but dont flash. same as the indicators... they come on but dont flash.
so wud it still be this switch thats nackered? if so could one of the breakers supply? :)
cheers.
Big one immediately left of OBD II port
-
ok checked the fuse. (cant find a relay for them) the fuse is fine.
checked the problem for myself and the hazards go on but dont flash. same as the indicators... they come on but dont flash.
so wud it still be this switch thats nackered? if so could one of the breakers supply? :)
cheers.
Got loads here Steve. Doublecheck relay first
-
ok checked the fuse. (cant find a relay for them) the fuse is fine.
checked the problem for myself and the hazards go on but dont flash. same as the indicators... they come on but dont flash.
so wud it still be this switch thats nackered? if so could one of the breakers supply? :)
cheers.
AHHH .. different from your first post "don't work" ..... :)
"don't work" = no light = no electrickery .... fuses/relays etc
"don't flash" = lots of electrickery.. so fuses good, relays good .. but probably flasher unit nadgered .. :)
-
ok checked the fuse. (cant find a relay for them) the fuse is fine.
checked the problem for myself and the hazards go on but dont flash. same as the indicators... they come on but dont flash.
so wud it still be this switch thats nackered? if so could one of the breakers supply? :)
cheers.
AHHH .. different from your first post "don't work" ..... :)
"don't work" = no light = no electrickery .... fuses/relays etc
"don't flash" = lots of electrickery.. so fuses good, relays good .. but probably flasher unit nadgered .. :)
yeah sorry about that... only just got home to confirm the problem myself. sorry for confusion.
i got a hazard switch as above coming from roberto-g :y
-
More likely to be the flasher unit (relay) ;)