Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Timw976 on 31 December 2012, 22:56:55
-
Hi All
Firstly thanks for all the advice on the problems with the starting on my Omega. After all the advice, I had the fault codes in the ECU read on a tech 2 machine and they showed a fault on the cam sensor. I have had this changed today and all the codes removed from the system. The car has been fine until this evening when the same fault has appeared. :'(
I go to start the car, it struggles to start and finally fires but with the engine management light on (small car with the spanner) The car doesnt go in to limp mode and drives normally.
I'm now confused!! Any ideas now that the cam sensor has been changed will be gratefully received
Cheers
Tim
-
As you're almost neighbours to MarksDTM, contact him & ask if he'll look at your car. If he can't fix it or at least diagnose the problem ......... :y :y
-
Cool thanks for the reply ill look him up on here
Thanks again
-
Another vote for Marks DTM :y
Was it a pattern cam sensor, or genuine?
-
It was a genuine sensor from Vaux dealership......92quid for a sensor!!!! Robbing swines lol
-
It was a genuine sensor from Vaux dealership......92quid for a sensor!!!! Robbing swines lol
Around £60 trade
-
You'd have got trade price if you'd got a TC card ;)
-
You'd have got trade price if you'd got a TC card ;)
....or bought from Andyc......