Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Marie on 25 January 2013, 19:54:00
-
(http://i1359.photobucket.com/albums/q783/marieroffey1/brokebit_zps246423bb.jpg)
Please see white circled items what system is this from i has a pipe on the back and does anyone have a spare or a part number.
think its the vac system not 100% though
thanks fellas
-
It looks like 2 connectors. Dealer doesn't sell connectors. Junk yard.
-
That's the solenoid valve for the secondary air injection system, I'm pretty sure. As said, scrapyard for anything with an x20xev engine will be cheapest.
Here's a pic of it intact on my missus's old car, if it helps at all:
(http://i219.photobucket.com/albums/cc138/EZ_Pete/6fa98cef.jpg)
It looks like the connector part of your valve has been torn out and is still latched into the loom connector?
-
I *may* have a spare solenoid in the garage, if its the same as V6 multiram ones.
-
I *may* have a spare solenoid in the garage, if its the same as V6 multiram ones.
if you do can i buy it off you please.
secondly can i run the car with out the plug intact ? i would say yes knowing the secondary air injection is just to warm the cat up and most people disconnect it. just after confirmation really :y
-
I would have thought it would bring on the EML?
-
Agreed, but no problem to drive.
-
I would have thought it would bring on the EML?
no lights on the dash well the eml and if itdid come on id be driving to pay you a visit :)
-
There the same as the V6 (which has three on the 3.0 and 2.5) so easy to get. Replacing with a 1k resistor will keep the light off
-
There the same as the V6 (which has three on the 3.0 and 2.5) so easy to get. Replacing with a 1k resistor will keep the light off
cool i dont have a light on though.
you dont have one knocking about do you ?