Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: razzo on 27 January 2013, 16:35:02

Title: noisey water pump
Post by: razzo on 27 January 2013, 16:35:02
evening all, need a new V6 water pump as its starting to sound like a bag of marbles in a washing machine, got this one from buy parts by & its dying at only 26k so is it stealers or elsewhere for a new one any advice welcome

ta
Title: Re: noisey water pump
Post by: Lizzie_Zoom on 27 January 2013, 16:56:26
Yes you need to replace urgently to avoid breaking your cam belt.

Always fit a genuine Vx part (093170697) @ £67.49 trade plus VAT to avoid early replacement as you have found with a pattern pump. ;)

I would add that replacement of the cam belt is advisable if change is due. :y
Title: Re: noisey water pump
Post by: Elite Pete on 27 January 2013, 17:00:51
Yes you need to replace urgently to avoid breaking your cam belt.

Always fit a genuine Vx part (093170697) @ £67.49 trade plus VAT to avoid early replacement as you have found with a pattern pump. ;)

I would add that replacement of the cam belt is advisable if change is due. :y

Water pump on the V6 is driven by the auxiliary belt ;)
Title: Re: noisey water pump
Post by: JamesV6CDX on 27 January 2013, 17:10:18
Whilst I concur that there have been some cheap imitaiton pattern water pumps which have become noisy early in their life - some pattern pumps are absolutely fine.

Autovaux do a Meyle pump, for example, which I have had huge success with. It's not always available, but when it is, it's around £26 / £29

Whilst it's unlikely, there have been instances whereby aux belts which have come adrift have found their way into the cambelt area and caused damage. This is unlikely, though, I'd think you'd need to be pretty unlucky...

Title: Re: noisey water pump
Post by: Lizzie_Zoom on 27 January 2013, 17:17:12
Yes you need to replace urgently to avoid breaking your cam belt.

Always fit a genuine Vx part (093170697) @ £67.49 trade plus VAT to avoid early replacement as you have found with a pattern pump. ;)

I would add that replacement of the cam belt is advisable if change is due. :y

Water pump on the V6 is driven by the auxiliary belt ;)

Oh yes!  Thanks Pete, I had forgotten that one :-[ :-[ ::) ::) :D :D :D  :y :y
Title: Re: noisey water pump
Post by: symes on 27 January 2013, 21:47:37
Have encountered on some cheap aftermarket pumps = rubbing of impeller on inside of block :o 
also make sure you dont mix up the 3 bolts=different lengths and you can do it without removing front cover-BUT I would remove it-drop 1 bolt  down the front -you will see nothing but grief=remove front cover  mate its longer but safer :y
Title: Re: noisey water pump
Post by: dbug on 27 January 2013, 23:27:19
Have used pattern pumps on V6, QH badged, and have been fine ;)