Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Elite Pete on 30 January 2013, 10:37:23

Title: Breaking for parts
Post by: Elite Pete on 30 January 2013, 10:37:23

I have an 03 2.2 Sport (MV6) saloon in Z156 Star Silver which I am am breaking for parts.

The wheels are already on my car and not for sale

Front MV6 bumper £50 with fog lights and grills or £75 including headlight washers, pipe work, washer bottle, pumps and relay.
 (http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport003.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport005.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport004.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport006.jpg)
Rear Prodrive boot spoiler £35
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport001.jpg)
Doors are in a good condition with only the passenger side rear showing a little rust £25 each minus door cards
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport007.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport008.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport002.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport011.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport009.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport010.jpg)

The car will be going to the scrapyard on Monday 11th because it's costing me £10 a day to store plus i'm away from the 1st to the 4th. I can store some items but due to the amount of time wasters I require a deposit. All prices are plus delivery but your more than welcome to collect, you never know you might even get a free cup of coffee ;D

Oh and payment by bank transfer or Paypal as a gift :y

Title: Re: Breaking for parts
Post by: twiglet on 30 January 2013, 12:44:32

Pete, I think the paint code for Star Sliver III is Z157 mate.  :y

Title: Re: Breaking for parts
Post by: Elite Pete on 30 January 2013, 12:45:51

Quote from: twiglet on 30 January 2013, 12:44:32

Pete, I think the paint code for Star Sliver III is Z157 mate.  :y

It is mate and sorry for any confusion caused to anyone :-[

Title: Re: Breaking for parts
Post by: mindaz on 30 January 2013, 14:14:32

Pete,
I need 4 mudflaps, front & rear  :)
do you still have it?
how much will cost?

thanks

Title: Re: Breaking for parts
Post by: Elite Pete on 30 January 2013, 15:52:56

Quote from: mindaz on 30 January 2013, 14:14:32

Pete,
I need 4 mudflaps, front & rear  :)
do you still have it?
how much will cost?

thanks

No

Title: Re: Breaking for parts
Post by: Vamps on 01 February 2013, 00:31:42

Quote from: Elite Pete on 30 January 2013, 10:37:23

I have an 03 2.2 Sport (MV6) saloon in Z156 Star Silver which I am am breaking for parts.

The wheels are already on my car and not for sale

Front MV6 bumper £50 with fog lights and grills or £75 including headlight washers, pipe work, washer bottle, pumps and relay.
 (http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport003.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport005.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport004.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport006.jpg)
Rear Prodrive boot spoiler £35
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport001.jpg)
Doors are in a good condition with only the passenger side rear showing a little rust £25 each minus door cards
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport007.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport008.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport002.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport011.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport009.jpg)
(http://i61.photobucket.com/albums/h64/pickledpepper/OmegaSport010.jpg)

The car will be going to the scrapyard on Monday 11th because it's costing me £10 a day to store plus i'm away from the 1st to the 4th. I can store some items but due to the amount of time wasters I require a deposit. All prices are plus delivery but your more than welcome to collect, you never know you might even get a free cup of coffee ;D

Oh and payment by bank transfer or Paypal as a gift :y

That can not be good economics.....  ::) :-X ::)

Title: Re: Breaking for parts
Post by: adey2 on 03 February 2013, 00:28:03

if they dont sell before you scrap how much for the silver door trims off the door cards, cant stand the crappy wood effect

Title: Re: Breaking for parts
Post by: feeutfo on 03 February 2013, 23:24:47

Pete you have pm's re springs. :)

Title: Re: Breaking for parts
Post by: tunnie on 04 February 2013, 09:24:11

Whats the condition of the droplinks? As I need both parts each side, if they are recent ish its worth a go I think

I'm also wondering about wishbones, to get a used set, then poly them up and change ball joints so they are ready for a straight swap.

Title: Re: Breaking for parts
Post by: TheBoy on 04 February 2013, 13:30:24

Quote from: tunnie on 04 February 2013, 09:24:11

Whats the condition of the droplinks? As I need both parts each side, if they are recent ish its worth a go I think

I'm also wondering about wishbones, to get a used set, then poly them up and change ball joints so they are ready for a straight swap.

That brings being tight careful with money to a whole new level ;D

Title: Re: Breaking for parts
Post by: tunnie on 04 February 2013, 13:54:25

Quote from: TheBoy on 04 February 2013, 13:30:24

Quote from: tunnie on 04 February 2013, 09:24:11

Whats the condition of the droplinks? As I need both parts each side, if they are recent ish its worth a go I think

I'm also wondering about wishbones, to get a used set, then poly them up and change ball joints so they are ready for a straight swap.

That brings being tight careful with money to a whole new level ;D

Seam to recall you saying it was not a bad idea for breakers ones? Take them apart and pack them up with copper slip?  ???

Title: Re: Breaking for parts
Post by: tunnie on 04 February 2013, 14:00:21

Bah, I've just realised I meant to say track rod ends  ::)  :-[

Got Meyle HD on the 3.2 and GM on 2.2 drop links wise, its track rod ends that need replacing and need both sides on each side  :-[  ::) ::)

Title: Re: Breaking for parts
Post by: Crazycarzowner on 04 February 2013, 16:23:14

Hi Pete, could I have the offside rear light cluster (the inner workings) please??? If so how much??? think the circuit board on mines going faulty  ::)

TIA

Jason

Title: Re: Breaking for parts
Post by: Elite Pete on 04 February 2013, 16:52:11

Quote from: TheBoy on 04 February 2013, 13:30:24

Quote from: tunnie on 04 February 2013, 09:24:11

Whats the condition of the droplinks? As I need both parts each side, if they are recent ish its worth a go I think

I'm also wondering about wishbones, to get a used set, then poly them up and change ball joints so they are ready for a straight swap.

That brings being tight careful with money to a whole new level ;D

I was going to ask if he wanted the oil and filter as well ;D ;D

Title: Re: Breaking for parts
Post by: Elite Pete on 04 February 2013, 16:53:10

Quote from: tunnie on 04 February 2013, 14:00:21

Bah, I've just realised I meant to say track rod ends  ::)  :-[

Got Meyle HD on the 3.2 and GM on 2.2 drop links wise, its track rod ends that need replacing and need both sides on each side  :-[  ::) ::)

I honestly couldn't say how long they've been on there Mark or what make they are

Title: Re: Breaking for parts
Post by: Elite Pete on 04 February 2013, 16:53:48

Quote from: Jasonm on 04 February 2013, 16:23:14

Hi Pete, could I have the offside rear light cluster (the inner workings) please??? If so how much??? think the circuit board on mines going faulty  ::)

TIA

Jason

PM sent

Title: Re: Breaking for parts
Post by: TheBoy on 04 February 2013, 16:59:09

Quote from: tunnie on 04 February 2013, 13:54:25

Quote from: TheBoy on 04 February 2013, 13:30:24

Quote from: tunnie on 04 February 2013, 09:24:11

Whats the condition of the droplinks? As I need both parts each side, if they are recent ish its worth a go I think

I'm also wondering about wishbones, to get a used set, then poly them up and change ball joints so they are ready for a straight swap.

That brings being tight careful with money to a whole new level ;D

Seam to recall you saying it was not a bad idea for breakers ones? Take them apart and pack them up with copper slip?  ???

Nope, never. Always replace. (TRE or droplinks or anything else with a balljoint)

Title: Re: Breaking for parts
Post by: Jimbob on 05 February 2013, 15:31:29

Locking as no more parts available