Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: humbucker on 07 February 2013, 22:15:54

Title: Block to sump sealant
Post by: humbucker on 07 February 2013, 22:15:54

Does anyone know what the sealant used that sandwiches the block to the sump is (on a V6 at least)? I don't mean the sump tray (which in the pic below shows grey sealant) but I mean the actual top assembly that joins to the bottom of the block? I *think* it's the black gasket type sealant used elsewhere but wondered if anyone knew for sure?

I've highlighted the bit I mean in the following pic:

(http://www.mediajustice.co.uk/images/omegawip/IMAG0949.jpg)

 :y

Title: Re: Block to sump sealant
Post by: RobG on 07 February 2013, 22:24:53

If you mean the main casting Dan (upper sump), use the grey

Title: Re: Block to sump sealant
Post by: Lazydocker on 07 February 2013, 22:27:48

I would have thought grey would be best :y

Title: Re: Block to sump sealant
Post by: humbucker on 07 February 2013, 22:29:51

Thanks chaps, much appreciated.  :y