Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: viper357 on 12 February 2013, 12:52:40

Title: Loose wires in parking sensor loom
Post by: viper357 on 12 February 2013, 12:52:40
Hi guys

I noticed these two loose wires in the loom in the boot for the parking sensors, any idea what they are for and if they should be plugged into each other? Thanks.

(https://dl.dropbox.com/u/60435245/2013-02-11%2018.43.53%20%28Custom%29.jpg)

(https://dl.dropbox.com/u/60435245/2013-02-11%2018.43.53.jpg)
Title: Re: Loose wires in parking sensor loom
Post by: kcl on 12 February 2013, 13:52:31
Is this topic for any help? http://www.omegaowners.com/forum/index.php?topic=103569.msg1296781#msg1296781 (http://www.omegaowners.com/forum/index.php?topic=103569.msg1296781#msg1296781)

Volume adjustment as I understood... disconnected = low, connected = high
Title: Re: Loose wires in parking sensor loom
Post by: viper357 on 12 February 2013, 14:52:37
Thank you. :) I looked at so many different threads but didn't come across that one, probably because they called it pilot instead of sensors.

Anyway, my sensors seem to be working in that I can feel and hear the clicking on each sensor, but there is no beeping inside the car, I would assume this could be a speaker fault? Does the system have a separate speaker or any idea's what else could be the problem? Thanks.
Title: Re: Loose wires in parking sensor loom
Post by: RobG on 12 February 2013, 14:54:43
Thank you. :) I looked at so many different threads but didn't come across that one, probably because they called it pilot instead of sensors.

Anyway, my sensors seem to be working in that I can feel and hear the clicking on each sensor, but there is no beeping inside the car, I would assume this could be a speaker fault? Does the system have a separate speaker or any idea's what else could be the problem? Thanks.
In an estate the speaker is mounted above the head lining at the top of the C-Pillar on the passenger side. Saloon is usually around the sunroof area.
Title: Re: Loose wires in parking sensor loom
Post by: RobG on 12 February 2013, 14:58:58
If speaker is donald you can use a modified tweeter. A lot cheaper and more reliable