Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: alan_rose on 18 February 2013, 12:14:19

Title: maf sensor
Post by: alan_rose on 18 February 2013, 12:14:19
can anybody help
i have a problem with my wreg 2litre 16 valve omega,when i start it from cold i can smell petrol,then when warmed up it keeps cutting out when i come to a stop.
i have cleaned the throtle body but still the same, did a paperclip test and code 0100 came up, could it be the MAF sensor is at fault
Title: Re: maf sensor
Post by: RobG on 18 February 2013, 16:26:25
can anybody help
i have a problem with my wreg 2litre 16 valve omega,when i start it from cold i can smell petrol,then when warmed up it keeps cutting out when i come to a stop.
i have cleaned the throtle body but still the same, did a paperclip test and code 0100 came up, could it be the MAF sensor is at fault
Have you cleaned the IACV?
Wouldn`t hurt to unplug MAF see if there`s any change
Title: Re: maf sensor
Post by: alan_rose on 18 February 2013, 17:48:16
unpluged the MAF ran the car up to temp never even attempted to cut out, switched it off put the plug back in started the car and almost straight away it tried to cut out, revs dropping below 400rpm then back up to 600rpm.
so should i replace the MAF sensor or could it be somthing else.
Title: Re: maf sensor
Post by: dbug on 19 February 2013, 01:31:35
Think you've answered your question mate  ;)
Title: Re: maf sensor
Post by: alan_rose on 19 February 2013, 05:42:36
thanks for the help
Title: Re: maf sensor
Post by: Elite Pete on 19 February 2013, 07:25:27
Try and buy a genuine one though not a cheap Chinese one off Ebay, they don't work very well