Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Andy89 on 02 March 2013, 08:04:34

Title: Anybody got a DMF laying around, need a measurement
Post by: Andy89 on 02 March 2013, 08:04:34
I need to know how thick the part where the bolts go through are, and if possible how much thread are left on the bolts
I'm fitting a C20LET flywheel and I don't know what bolts to use  :-\
Title: Re: Anybody got a DMF laying around, need a measurement
Post by: 2woody on 03 March 2013, 22:22:52
26.4mm thickness of DMF at centre

16.0mm engagement into crankshaft

the bolts are a funny thread, mind.

You must also get the same grade of bolt as currently fitted or you'll not be getting the clamping force you're expecting. They're not marked I'm afraid, so there will be some testing to do.
Title: Re: Anybody got a DMF laying around, need a measurement
Post by: P6UL K on 03 March 2013, 22:35:15
I'll be using these...

http://www.ebay.co.uk/itm/ARP-FLYWHEEL-BOLTS-16V-VAUXHALL-C20XE-C20LET-KIT-CAR-/300719534125?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item460447f02d
Title: Re: Anybody got a DMF laying around, need a measurement
Post by: serek on 03 March 2013, 22:37:03
26.4mm thickness of DMF at centre

16.0mm engagement into crankshaft

the bolts are a funny thread, mind.

You must also get the same grade of bolt as currently fitted or you'll not be getting the clamping force you're expecting. They're not marked I'm afraid, so there will be some testing to do.
agree
best way get then from VXL/Opel
or ebay like P6ULK do
Title: Re: Anybody got a DMF laying around, need a measurement
Post by: 2woody on 03 March 2013, 22:59:42
Why not just use screws from an auto ? they're about that length

I have a spare set if you want......
Title: Re: Anybody got a DMF laying around, need a measurement
Post by: Andy89 on 04 March 2013, 19:09:40
Just ordered C20let bolts of Opel today.
Thanks guys  :)

No time to wait for ebay, get the bolts from Opel tomorrow  ;)
Title: Re: Anybody got a DMF laying around, need a measurement
Post by: 2woody on 04 March 2013, 23:16:52
eight ?
Title: Re: Anybody got a DMF laying around, need a measurement
Post by: Andy89 on 05 March 2013, 06:11:37
Yes, all eight bolts