Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: sassanach on 10 March 2013, 21:21:27

Title: sill trims
Post by: sassanach on 10 March 2013, 21:21:27

anyone know how to remove the plastic sill trims on an omega?

Title: Re: sill trims
Post by: Webby the Bear on 10 March 2013, 21:23:34

Quote from: sassanach on 10 March 2013, 21:21:27

anyone know how to remove the plastic sill trims on an omega?

use the jack that comes with the car... pop right off  ::)

Title: Re: sill trims
Post by: sassanach on 10 March 2013, 21:24:30

ive inflicted enough damage on this motor thank you ;D

Title: Re: sill trims
Post by: feeutfo on 10 March 2013, 22:40:50

Little studs have a hole in the middle, they press onto metal,pegs on the body. They look like press through dowels like on the end caps, but they are not.

Once the fixings are removed it just pulls off the clips behind.

Title: Re: sill trims
Post by: 05omegav6 on 11 March 2013, 01:28:00

One screw under the front end as well :y

Title: Re: sill trims
Post by: The Red Baron on 11 March 2013, 19:44:24

Quote from: chrisgixer on 10 March 2013, 22:40:50

Little studs have a hole in the middle, they press onto metal,pegs on the body. They look like press through dowels like on the end caps, but they are not.

Once the fixings are removed it just pulls off the clips behind.

with a gentle tug from the bottom lip.  :y