Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: danzigfan on 11 March 2013, 20:21:35
-
Evening guys, I have an issue with driver's side door rubbing strip - it came of a bit just enough to get cought in front side wing....well...you know what happened.
I managed to put it back on somehow and glue it just enouh to hold in place.
The thing is, omega is still in very good condition, beside the doors. That's why I have another four of them in the garage- prepared for rust repair and then paintjob.
I believe it would be better having F/L door rubbing strips because I could place them on fixed doors and back on the car again after rust sorted out....old - mini F/L are disposable am I right?
Due to lack of omegas in my country I would need to get those door strips from England I know.
Thanks in advance, Stan
-
Some on here have upgraded to FL strips, I think they look better, and don't tend to get caught. :y
-
Exactly and IIRC they can be refitted due to different system holding them onto the door.
-
Stealing the pics of Elite Pete's omega former omega sorry
http://oldsite.omegaowners.com/forum/YaBB.pl?num=1206627756/2
-
Exactly and IIRC they can be refitted due to different system holding them onto the door.
Don't forget that you lose the chrome trim so unless you remove the trim from the front & rear bumpers they can look odd.
-
Exactly and IIRC they can be refitted due to different system holding them onto the door.
Don't forget that you lose the chrome trim so unless you remove the trim from the front & rear bumpers they can look odd.
Thanks Andy, yes I saw that on pics, looks a bit odd. Would look better if I could get strip for tailgate to