Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: ted_one on 15 March 2013, 14:27:45
-
Sorry guys,it's another question...looks like I'm going to replace the o/s rear door,need to know how to,if any one can give me some pointers..again will be much apreciated. :y
-
1. Pull the loom from the B post and un plug it. If electric, drop the window first.
2. Un bolt the check strap.
3. Support the door.
4. Drift the hinge pins out with summat suitable.
Can be done single handedly, but given how heavy the doors are, two people makes it alot easier :y
-
1. Pull the loom from the B post and un plug it. If electric, drop the window first.
2. Un bolt the check strap.
3. Support the door.
4. Drift the hinge pins out with summat suitable.
Can be done single handedly, but given how heavy the doors are, two people makes it alot easier :y
After unbolting check strap, close door, open driver`s door, drift both pins out, then remove rear door
-
1. Pull the loom from the B post and un plug it. If electric, drop the window first.
2. Un bolt the check strap.
3. Support the door.
4. Drift the hinge pins out with summat suitable.
Can be done single handedly, but given how heavy the doors are, two people makes it alot easier :y
i have done that on my own ONCE....never again...break me they are heavy :y
forgot my 3 weetabix that day
-
1. Pull the loom from the B post and un plug it. If electric, drop the window first.
2. Un bolt the check strap.
3. Support the door.
4. Drift the hinge pins out with summat suitable.
Can be done single handedly, but given how heavy the doors are, two people makes it alot easier :y
i have done that on my own ONCE....never again...break me they are heavy :y
forgot my 3 weetabix that day
A doddle if you use my method ^^^^ :)
-
Many thanks to every one for the advice..all taken and will put to good use :y