Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: terry paget on 14 May 2013, 08:29:12

Title: torque setting pinch bolt wishbone outer pin to steering hub
Post by: terry paget on 14 May 2013, 08:29:12

I cannot work out from Haynes the above torque setting. It is for the pinch bolt that clamps the steering hub to the waisted ball joint pin on the lower wishbone. Please enlighten me

Title: Re: torque setting pinch bolt wishbone outer pin to steering hub
Post by: RobG on 14 May 2013, 08:45:06

35Nm

Title: Re: torque setting pinch bolt wishbone outer pin to steering hub
Post by: terry paget on 14 May 2013, 14:03:50

Thanks