Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: paintshoptec on 19 May 2013, 12:37:55

Title: ar25
Post by: paintshoptec on 19 May 2013, 12:37:55

hi all
got a problem with my ar25 on my 2.6 2002 omega tried all the obvious things.
i can get hold ar35 as a replacement instead of a ar25 which as only done 66k miles could anyone tell me
if its just a straight swap or will it it need to go on a tech 2
thanks

Title: Re: ar25
Post by: bigegg on 19 May 2013, 12:43:51

dunno about the mig, but was a straight swap on my 3.0 Carlton

Title: Re: ar25
Post by: tunnie on 19 May 2013, 13:15:21

Straight swap  :y

Title: Re: ar25
Post by: TheBoy on 19 May 2013, 17:20:46

Straight swap. Use your existing 2.6 TCM :)

Title: Re: ar25
Post by: paintshoptec on 19 May 2013, 19:56:22

i take it that tcm is the torque converter

Title: Re: ar25
Post by: dbug on 19 May 2013, 20:12:06

Quote from: paintshoptec on 19 May 2013, 19:56:22

i take it that tcm is the torque converter

 :y :y

Title: Re: ar25
Post by: henryd on 19 May 2013, 20:38:56

Quote from: dbug on 19 May 2013, 20:12:06

Quote from: paintshoptec on 19 May 2013, 19:56:22

i take it that tcm is the torque converter

 :y :y

 ???,wouldnt that be Transmission Control Module ::) ;)

Title: Re: ar25
Post by: TheBoy on 19 May 2013, 21:02:44

Quote from: paintshoptec on 19 May 2013, 19:56:22

i take it that tcm is the torque converter

No, Transmission Control Module, which is the gearbox ECU near the bonnet lever.

Title: Re: ar25
Post by: paintshoptec on 19 May 2013, 21:17:18

so ar35 gearbox with torque converter from my 2.6 and thats it

Title: Re: ar25
Post by: henryd on 19 May 2013, 22:44:31

Quote from: paintshoptec on 19 May 2013, 21:17:18

so ar35 gearbox with torque converter from my 2.6 and thats it

If the Torque converter is with the Ar35 that you have then I would be tempted to use it,if your ar25 box is breaking up internally then filings/swarth could already be in the torque converter so fitting it to the new box may cause problems :y

Title: Re: ar25
Post by: dbug on 19 May 2013, 23:05:26

Quote from: dbug on 19 May 2013, 20:12:06

Quote from: paintshoptec on 19 May 2013, 19:56:22

i take it that tcm is the torque converter

 :y :y

Stand corrected :-[

Title: Re: ar25
Post by: paintshoptec on 29 May 2013, 11:44:52

ar35 now in the car runs like a dream thanks for your help guys
neil

Title: Re: ar25
Post by: cem_devecioglu on 29 May 2013, 11:47:48

Quote from: paintshoptec on 29 May 2013, 11:44:52

ar35 now in the car runs like a dream thanks for your help guys
neil

how about the gearbox ratios ?

Title: Re: ar25
Post by: paintshoptec on 29 May 2013, 11:48:43

its all running ok no issues